What is the turf made from?
All of our hitting & putting surfaces are made of high strength nylon yarn, nylon yarn is the most durable yarn when comparing it to the more commonly used polyethylene & Polypropylene yarn. The backing is made with a high strength polyurethane coating.
Where are your products made?
All of our products are made in the United States
How wide are the rolls of turf?
Our EZTee Hybrid Plus hitting surface comes 12’ wide from our manufacturer and we typically precut these rolls into 6’ x 4’ or 6’ x 6’ hitting mats. These are the two most common sizes.
Our CX-27 rolls are 15’ wide from our manufacturer, the most common size is 15’ x 15’ but these rolls can be cut to any linear footage needed.
How long will it take to receive my order?
We have a warehouse located in B.C. & another located in Ontario so you should always receive your order 5 – 12 business days after your purchase.
How long should my simulator turf last?
Our EZTee Hybrid Plus was designed for commercial use and is installed on driving ranges across Canada. A driving range will typically replace our turf every 5 years. This means you should get 7 – 10 years of use.
How do I secure the turf to the floor?
There are many different ways of securing the turf to your floor. The first option is to lay it out and test it out without securing first. You may find you don’t need to secure it at all. You can spot glue the perimeter or the corners if you want a snug fit. If you are putting plywood down you can screw down the perimeter with screws.
Is the height of the EZTee Hybrid Plus the same as the putting surface?
The EZTee Hybrid Plus hitting turf is ¾” taller than the putting surface. Some clients will raise the putting surface to match the height of the hitting turf. Other clients do not care if the hitting turf is a little taller as you typically stand on the hitting mat while you are hitting.